Casio 575E1A - Manual (Page 47)

E-45
Saving User Tones
The group of tone numbers from 700 through 799 (User 001 through User 100) is called the “user area” because they are reserved for
storage of user tones. After you recall a preset tone and change its parameters to create your own user tone, you can store it in the user
area for later recall. You can recall your tones using the same procedure that you use when selecting a preset tone.
* 1: You can select any Advanced Tone, preset tone, or user tone. User tone areas 700 through 799 initially contain the same data
as advanced tones 000 through 099.
* 2: Area where data transferred from computer is stored (see “Internet Data Expansion System” on page E-79). After transfer,
you can use the digital piano to edit parameters, but you can only overwrite existing parameters. You cannot save the data to
another number.
* 3: Area where data transferred from computer is stored (see “Internet Data Expansion System” on page E-79). Transfer only is
allowed, and no parameter editing is allowed.
* 4: User tones created by modifying parameters of one of the preset tones (000 to 049). User drawbar organ tone areas initially
contain two sets of the same data as drawbar organ tones types 000 through 049.
NOTE
• You can create an original tone using a user tone that includes a waveform (tone number 800 to 819). In this case, the
storage area is the same as the source tone area. For example, an original tone created using tone number 800 as a source
tone is stored in user area number 800.
Number Tone Type
000-399 Advanced Tones
400-599 Preset Tones
000-049 Preset Tones
100-199 User Tones*4
600-619 Drum Sets Source Tone Select Parameter Edit
Save As Original Tone 700-799 User Tones*1
800-819 User Tones with Waves*2
900-903 User Drum Sets with Waves*3
700-799 User Area
Standard Tone
Drawbar Organ Tones
Synthesizer Mode