Casio 575E1A - Manual (Page 25)

E-23
Using the Drawbar Organ Mode
Editing Synthesizer Mode Parameters
and DSP Parameters of Drawbar Tones
As with standard (non-drawbar) tones, you can edit the
Synthesizer Mode parameters and DSP parameters of
drawbar organ tones. See “Drawbar Organ Mode Operational
Flow” on page E-21.
1
Use the [ ̇] and [̈] CURSOR buttons to display
“More?”, and then press the [
̄] CURSOR button.
• This enters the Synthesizer Mode, which is indicated
by the indicator next to SYNTH on the display screen.
• For the remainder of this procedure, perform the steps
starting from step 3 under “Creating a User Tone” on
page E-46.
Parameter Details
The following provides details about the parameters you can
configure using the drawbar organ tone editing screen.
Drawbar Position
This parameter defines the position of each drawbar, and the
volume of each overtone. The larger the value, the greater
the corresponding overtone’s volume.
(Ft: Feet)
Click
The parameter determines whether or not a key click is added
when a sustained tone configured using the drawbars is
played.
Parameter Name
Drawbar 16’
Drawbar 5 1/3’
Drawbar 8’
Drawbar 4’
Drawbar 2 2/3’
Drawbar 2’
Drawbar 1 3/5’
Drawbar 1 1/3’
Drawbar 1’
Parameter Display
Indication
Ft 16’
Ft 5 1/3’
Ft 8’
Ft 4’
Ft 2 2/3’
Ft 2’
Ft 1 3/5’
Ft 1 1/3’
Ft 1’
Settings
0 to 3
0 to 3
0 to 3
0 to 3
0 to 3
0 to 3
0 to 3
0 to 3
0 to 3
Parameter Name
Click
Parameter Display
Indication
Click
Settings
Off
On
Percussion
This parameter lets you add percussion sound, which
provides modulation to sustained tones that you create. When
you hold down a key on the keyboard, the sound produced
decays until it is no longer audible. Pressing the key again
sounds the note again at a louder volume. Percussion has
“2nd Percussion” (2nd overtone pitch) and “3rd Percussion”
(3rd overtone pitch) settings, each of which can be turned on
or off.
You can also specify the percussion decay time, which controls
how long it takes for the percussion sound to decay.
Parameter Name
2nd Percussion
3rd Percussion
Percussion
Decay Time
Parameter Display
Indication
Second
Third
Decay
Settings
Off
On
000 to 127