PDR Mounts awm250 User Manual

Page 8

Text mode
Original mode

DISPLAY LEVELING BOLTS

FINE TILT ADJUSTER

LOCKING SCREW
AND TAB

TILT LOCK

5. DISPLAY PANEL ADJUSTMENT AND CABLE MANAGEMENT

After placing the display on to the AWM250 articulating arm and securing the locking screw tabs, fine adjustments can be made for your best viewing.
If the display is not level from left to right Loosen the display leveling bolts and adjust the display and re-tighten the bolts.
To tilt the display up or down, loosen the tilt lock knob and adjust with the fine tilt adjuster to the desired view angle.
Re-tighten the Tilt lock when complete.

See fig 5

Cables can be routed thru the cable management brackets supplied (5) .
Be careful when routing cables. Do not to place cables or wires in a pinch point when the mount is extended or closed.
Use the top tube and middle tube to attach the cable management brackets.

See fig 5a

FIG 5

FIG 5a