PDR Mounts awm250 - Manual (Page 6)

6
3. SECURE THE DISPLAY BRACKETS TO THE MO NITOR
NOTE: Do not over tighten the bracket mounting screws as damage to the display internal mounting threads could occur.
Mounting hardware (1,2,3)
Square Multi-mount washer (8)
Panel display bottom edge
Display bracket
Place the display panel on a protected surface.
Position the display bracket with the round holes towards the bottom
See Fig 3
Position the brackets equal distance from the bottom and top.
Using the proper screws and the square multi washers supplied (1,2,3,8),insert and tighten hardware.
See Fig 3a
DISPLAY BRACKET BOTTOM
Fig 3
Fig 3a
EQUAL TO
TOP
EQUAL TO
BOTTOM