Outdoor Great Room Lodge II Pergola - Manual (Page 10)

Lodge II Pergola Assembly Instructions – Main Assembly 8
Step 13:
Insert part “K” into end of A-frame.
A rubber mallet may be required if it does
not slide in easily. Slide downward until
both holes line up. Insert bolts “S” and “V”
as indicated with washers and lock-
washers. Tighten securely.
K
Step 14:
Lift center A-frame into place. This is the frame assembled in
Step 6. Ensure frame is centered and pergola is squared
before fastening to ledger beams with wood screws “Y.”
Repeat steps 11-13 to complete installation of A-frames.