NextoDI NVS2525 User Manual
Page 23
39
ADVANCED FUNCTIONS
ADVANCED FUNCTIONS
40
(2) Full test
Self Test
Select a Method
HDD Smart Test
HDD Full Test
149.0 GB
Select
Back
HDD Full Test
149.0 GB
Back
It will take several
hours to test.
Are you Ready?
Ok
Cancel
7m52s
0 Bad Clusters Found
HDD Full Test
149.0 GB
Caution
● The NVSPRO+ indicates the completion of the test using the buzzer
sound. The power does not turn off automatically at the completion
of the test.
● The NVSPRO+ returns to the initial mode only after the user pushes
the control key for more than 2 seconds.
● It is strongly recommended that the AC adapter be connected for
this test in order to prevent battery failure during the process.
Full Test OK.
Back
0 Bad Clusters Found.
HDD Full Test
149.0 GB
0 Bad Clusters Found.
HDD Full Test
149.0 GB
Off
Check it again at PC.
Select “FULL TEST” from the self test menu.
The full test will take several hours. It will
read all the sectors in the internal hard drive
to discover if any bad sectors exist.
Full test in progress. This process will take
about 2~3 hours.
The user can cancel the full test by pressing
the control key for more than 2 seconds.
No errors found.
Error found during full test. Further use of
NVSPRO+ may result in the loss of backup data.
Consult your authorized NEXTODI dealer for
service.