Preparing your workstation for installation, Preparing your workstation for installation -3 – Cabletron Systems Network Router User Manual
Page 21

Installing SPECTRUM for Solstice Enterprise Manager
Preparing Your Workstation for Installation
2-3
applications simultaneously, you may improve performance by
assigning additional swap space. The SPMA core product and device
modules require hard disk space as speciÞed below:
SPMA Core
71 megabytes
Device modules
from 4 to 43 megabytes; average size 27
megabytes
Entire product
248 megabytes
Be sure you have enough hard disk space over and above that
required by Solstice Enterprise Manager to install the modules you
need; note that size estimates include space for the associated
documentation.
Software Requirements
SPMA has the following operating system and windowing system
software requirements:
Solaris version 2.5.1 or 2.6
OpenWindows Version 3 (3.5.1 via showrev -v)
CDE version 1.0.2
Solstice Enterprise Manager version 2.0
Preparing Your Workstation for Installation
Before you can successfully run the install script from the SPMA
CD-ROM, there are several parameters you must set for your
workstation. You must run the install as root; therefore, if display
parameters have not been set for root, you may need to set the
display environment variable to the hostname of your workstation.
You may also need to give root permission to display the install
windows by using the
xhost
command. These and other steps
necessary to execute before installing from a local or remote CD-ROM
drive are described below.
00-Instl_SEM-Solaris_Book Page 3 Monday, October 5, 1998 11:41 AM