Nexen SBP09 965110 - Manual (Page 4)

FORM NO. L-21059-E-0813 4
GENERAL SPECIFICATIONS
Size
Min Holding
Torque
Torsional Rigidity
(Estimated)
Inertia
(Calculated) Weight
Min. Disengagement
Air Pressure
Size 7
125 Nm
[92 ft*lb]
54772 Nm/RAD
[40390 ft*lb/RAD]
0.00344 kg*m^2
[0.0816 lb*ft^2]
13.6 kg
[30 lbs]
5.5 bar
[80 psi]
Size 9
125 Nm
[92 ft*lb]
102733 Nm/RAD
[75757 ft*lb/RAD]
0.00344 kg*m^2
[0.0816 lb*ft^2]
16.1 kg
[35.5 lbs]
5.5 bar
[80 psi]
Size 11
125 Nm
[92 ft*lb]
211695 Nm/RAD
[156110 ft*lb/RAD]
0.00344 kg*m^2
[0.0816 lb*ft^2]
28.5 kg
[63 lbs] 5.5 bar
[80 psi]
GENERAL SAFETY PRECAUTIONS
CAUTION
Use lifting aids and proper lifting
techniques when installing, removing,
or placing this product in service.
WARNING
This product is capable of emitting
a spark if misused, therefore it is not
recommended for use in any explosive
environment.
CAUTION
Use appropriate guarding for moving
components. Failure to guard could
result in serious bodily injury.
CAUTION
Watch for sharp features when
interacting with this product. The
parts have complex shapes and
machined edges.
CAUTION
Use appropriate guarding for moving
components. Failure to guard could
result in serious bodily injury.
CAUTION
The temperature limits for the
product are 4.5-104 degree
Celsius (40-220 degree F).
WARNING
Ensure proper guarding of the product is used.
Nexen recommends the machine builder
design guarding in compliance with OSHA 29
CFR 1910 “Occupational Safety and Health
Hazards”.