Nexen SBP09 965110 User Manual
Page 11
FORM NO. L-21059-E-0813
11
TABLE 5
14. While supporting the inner race of the new Ball Bearing
(Item 2), press the Output Shaft (Item 1) into the new
Bearing (Item 2) and Air Chamber (Item 6).
15. Position Friction Facing (Item 8) in the Air Chamber
(Item 6) so the angled surfaces match up with the wall
of the Air Chamber and the tapered disc of the Output
Shaft (Item 1).
16. Replace the Backing Plate (Item 15), Springs (Item 9)
and Input Flange (Item 10).
17. Apply a drop of Loctite® 242 (blue) to the threads of
the eight Socket Head Cap Screws (Item 11).
18. Reinstall and tighten the eight Socket Head Cap
Screws (Item 11), securing the Air Chamber (Item 6)
to the Input Flange (Item 10). Alternately tighten the
eight Cap Screws to keep the input flange parallel to
the Air Chamber. Refer to Table 5 for the recommended
assembly torque.
BEARING, O-RING SEALS AND SPRINGS ASSEMBLY (continued...)
Brake
Model
Socket Head
Cap Screw
(Item 11)
Recommended
Assembly
Torque
Size 7
M5
7.0-9.2 Nm
(62-81 in/lb)
Size 9
M5
7.0-9.2 Nm
(62-81 in/lb)
Size 11
M5
7.0-9.2 Nm
(62-81 in/lb)