Hit Products HDC Controller User Manual

Page 5

MASTER VALVE/PUMP START WIRING

If a master valve or pump start relay is being used in

conjunction with this controller, wire as follows.

Hit Products offers a wide range of pump start relays

for most applications that are compatible with the

HDC controller.

Note: DO NOT connect controller directly to pump.

Controller will be damaged if controller is connected

directly to pump.

a) Located at least 15 feet from controller.

b) Have a maximum rated inrush current less

then 350MA at 24 VAC, and be properly

sized for your application.

Connect one wire to the “MV” terminal and one

to the “Com” terminal.

If using a pump start relay, it must be;