Hit Products HDC Controller - Manual (Page 17)

17
Push the → button to choose the first station in the
sequence of the manual program to start.
The “run time” for each station will be displayed as
currently programmed. For this cycle only, you can
customize each station run time without effecting the
individually programmed station run times within a
program.
Push the → button to sequence through all the stations,
using the + or – buttons to select the desired run times
for this cycle only.
Push the → button until the station number appears of
which you want to start this custom cycle.
Rotate dial to “RUN” to start this custom, one-time
cycle. It will start with station number displayed in
Step 6. Once completed, controller will revert to
programmed “automatic” operation.
3)
4)
5)
6)
7)
MANUAL PROGRAM