Hit Products HDC Controller - Manual (Page 15)

DIAL POSITIONS AND FUNCTIONS
“RUN”
Rotate the dial counter clock wise to the “RUN” position
after completing any programming to enter this new data
in controller. Leave the dial in the RUN position to have
the controller operate as programmed automatically.
RAIN/OFF
Rotate the dial to the “RAIN/OFF” position to stop all
output of the controller. All irrigation will stop. Display
will flash “OFF”. To return to normal operation, rotate
dial back to “RUN”.
15
Repeat step 3 for each day of the week. The → button
may be used to advance to a particular day of the
week. To operate “odd” or “even” days of the month,
continue advancing the → button and then activate
“odd” or “even” as described in step 3 above.
4)