Hit Products HDC Controller - Manual (Page 14)

14
SETTING THE CALENDAR
Press the → button to go to the next station.
Repeat steps 3 and 4 for each station that is to be active
on each specific program. For stations/valves that are
to be inactive on each specific program, put “Station
Run Time” at “0”.
Each individual “Station Run Time” can range from
1 minute to 6 hours in duration.
Rotate dial to “RUN” to enter this new data into
controller.
4)
5)
6)
7)
Rotate dial to the Calendar/Schedule position.
Choose program A, B or C. To change program from
existing program, push the PRG button.
Using the + and – buttons will make a day either active
or inactive. “+” indicates an active day or non-circled.
Press the “-” button to change to a circled day, which
indicates an inactive day. Press the → button to advance
to the next day.
1)
2)
3)