The bradford white – Bradford White UDH-75T-50FR-3N User Manual
Page 22
SERVICE PROCEDURE VI
Burner Operation Inspection, Adjustment
Cleaning and Replacement
22
Step 4.
Disconnect (unscrew) feedline from the main burner door.
Step 5.
Remove main burner orifice from feed line (3/8" wrench). Inspect and
clean if necessary
Step 6.
Remove pilot assembly, refer to SERVICE PROCEDURE III
for cleaning and inspection.
Step 7.
Reassemble burner.
Step 8.
Reinstall burner and inner door per SERVICE PROCEDURE I,
steps 9 through 19.
Step 9.
To resume operation, follow the instructions located on the lighting instruction label or the lighting
instructions located in the installation and operation manual.
Feedline
Main Burner Orifice
The Bradford White
22
This manual is related to the following products: