Bradford White M-I-MH40T6FLX - Manual (Page 4)

Internet Version For Reference Only
GENERAL INFORMATION
This gas-fired water heater is design certified by the CSA International under
the applicable American National Standard, Z21.10.1 or Z21.10.3-(as
indicated on the rating plate) and CSA 4.1-(as indicated on the rating plate).
This water heater must be installed in accordance with local codes. In the
absence of local codes, it must be installed in compliance with the National
Fuel Gas Code (ANSI Z223.1-Latest Edition), or in Canada CAN/CGA B149.1
Natural Gas Installation Code (Latest Edition) or CAN/CGA B149.2 Propane
Installation Code (Latest Edition). The warranty for this water heater is in
effect only when the water heater is installed, adjusted, and operated in
accordance with these Installation and Operating Instructions. The
manufacturer will not be liable for any damage resulting from alteration and/or
failure to comply with these instructions.
This water heater must be installed in accordance with The Federal
Manufactured Home Construction And Safety Standard Title 24 CRF. part
3280 or CAN/CSA Z240 MH series, mobile home.
This water heater is designed certified for installation in a manufactured home
(mobile home) only and must be installed in an enclosure that will completely
separate the water heater combustion and venting systems from its interior.
The water heater enclosure access door must be on the outside wall of the
manufactured home (mobile home) only. Access to the water heater
enclosure from the inside of the manufactured home (mobile home) is not
permitted.
CSA International has tested a representative sample of this water heater
design for its safety of operation. The CSA listing of this water heater includes
the field installation of the following components: roof jack, leg enclosure
(optional), air intake tube (optional), and heater tie down materials. These
components for field installation may have been shipped with this heater and
must be installed according to these instructions (see page 25). No other
components are approved for use with this water heater.
This water heater has been designed and certified for the purpose of heating
potable water. The installation and use of this water heater for any purpose
other than the heating of potable water may cause damage to the water
heater, create a hazardous condition, and nullify the warranty.
4