AVF VC-TABLE T3 - Manual (Page 5)

OR
Wood Screw
(12)
OR
Mending plate
(3)
Wood Screw
(6)
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive, Aurora, Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Page 5
of 6

Step 11
Adding Mending Plates
Make sure table pieces are butted together
tightly.
From underneath the table.
Use a screwdriver or drill insert 4
wood screws per mending plate.
Step 10
Attaching rack to table
Select the configuration according to your layout.
and butt table pieces together as shown.
Lift pieces to move them, do not slide pieces.
Step 12
Applying Cable management
Remove sticker backing and apply
2 lengths of cable management
llike in step 3 (not shown)
Using a screwdriver or drill insert 3 short
wood screws per cable management strip.
One at each end and one approx in center.
