Drawing view361, Drawing view362, Drawing view363 – AVF VC-TABLE T3 User Manual
Page 4: Drawing view364, Drawing view366, Drawing view367, Drawing view385, Drawing view386, Drawing view387, Drawing view388
Fan cut-out
(Fan is optional)
Short bolt
(x6)
Wood Screw
(x16)
Wood
screws
(x16)
Drywall screws
+anchors(x4)
Mending plate
(x2)
L-bracket
(x2)
VIDEO FURNITURE INTERNATIONAL
190 Don Hillock Drive, Aurora, Ontario L4G 0G9 www.video-furn.com
Toll Free: 1-877-834-3876 Fax: 1-905-751-1488 Local:905-751-1459
Page 4
of 6
Step 7
Adding legs to the rack.
Using A philips screwdriver or drill, Screw
all 4 legs to the bottom of the rack using
included wood screws.
Leg height adjustment: Adjust the legs to
the lowest position.
Step 8
Adding rackrails to the rack.
1)Using A wrench or socket and included hex bolts.Screw
both rackrails into the metal inserts already in the sides.
2)Carefully roll the rack over onto its legs. (not shown)
Do not lift by the wings
Step 9
Positioning and attaching
bridge.
Position rack space where required
holding bridge in place as a spacer.
Bridge may be attached to a wall
(shown),furniture or a TP1000 stand.
There are 2 bridge lengths included.
Which to use will be determined by
camera requirements and space
available.
We suggest using the short bridge
for the closed (long) configuration.
Wall
and / or