B&C Technologies EDG Dryer Control (DE, DP, DI Series) - Manual (Page 14)

Alarms
14
TEMP PROBE
Faulty temperature probe, replace.
Part number 370-068.
ALM GAS PRES
Faulty wiring to EC3, terminal 8
ALM OVERLOAD
Motor Overload(s) tripped. Usually
caused by overloading the dryer.
FILTER OPEN
Close the lint filter door/drawer.
Check the lint door/drawer switch
ALM DEPRESSION
Check Blower motor
Check cabinet sail switch
Check that blower rotation is in the
correct direction (3 phase models)
Check for exhaust restriction
Check for make up air restriction
DOOR OPEN
Close the loading door
Check the loading door switch