Canon 70 - Manual (Page 11)

9
„
Setting the Display Language
1. Slide the mode switch to (playback).
2. Hold down the FUNC./SET button and press the MENU
button.
3. Use the , , or button to select a language and
press the FUNC./SET button.
The display language can also be set in the Set up menu
(p. 21) .
1.
Press the ON/OFF button.
The start-up sound will play and the
start-up image will display in the LCD
monitor.
• Pressing the ON/OFF button again
turns the power off.
• To switch to the setting that mutes all
sounds (except for the warning sound),
press and hold the DISP. button while pressing the ON/OFF button.
2.
Set the shooting mode to
(Auto).
1. Slide the mode switch to (Rec.)
(a).
2. Press the FUNC./SET button (b)
and use the or button (c) to
select
(Auto).
3. Press the FUNC./SET button (d).
3.
Aim the camera at the subject.
Shooting
Î See the Advanced Guide: Using the LCD Monitor (p. 12).
Î See the Advanced Guide: Power Saving Function (p. 19).
Î See the Advanced Guide: Set up Menu (p. 26).
Î See the Advanced Guide: My Camera Menu (p. 28).
ON/OFF button
a
b d
c
Shoo
ting