Canon LV-S1 - Manual (Page 21)

21
BASIC OPERATION
Press NO SHOW button on Remote Control Unit to black out the
image. To restore to normal, press NO SHOW button again or press
any other button.
NO SHOW FUNCTION
Message disappears after 4 seconds.
No show
Press P-TIMER button on Remote Control unit. The timer display “00
: 00” appears on the screen and the timer starts to count time (00 : 00
~ 59 : 59).
To stop P-TIMER display, press P-TIMER button. And then, press P-
TIMER button again to cancel P-TIMER function.
P-TIMER FUNCTION
1
2
Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT buttons to move a red frame pointer to
SOUND Menu icon.
Volume
Press VOLUME (+/–) button(s) on Remote Control Unit or POINT
LEFT / RIGHT (VOL –/+) button on Top Control to adjust volume. The
volume dialog box appears on the screen for a few seconds.
VOLUME (+) or POINT RIGHT (VOL +) button to increase volume,
and VOLUME (–) or POINT LEFT (VOL –) button for decreasing.
Mute
Press MUTE button on Remote Control Unit to cut off sound. To
restore sound to its previous level, press MUTE button again or press
Volume (+/–) or POINT LEFT / RIGHT (VOL –/+) button(s).
To increase volume, press POINT RIGHT (VOL +) button, and press
POINT LEFT (VOL –) button for decreasing.
Press POINT LEFT/RIGHT button(s) (VOL –/+) to cut off sound. The
dialog box display is changed to “On” and sound is cut off. To restore
sound to its previous level, press POINT LEFT/RIGHT (VOL –/+)
button(s) again.
Press POINT DOWN button to move a red frame pointer to the
item that you want to select, and then press SET button.
Indicates roughly
level of volume.
Close SOUND Menu.
SOUND ADJUSTMENT
DIRECT OPERATION
MENU OPERATION
Volume
Mute
Indicates roughly level of
volume.
Press MUTE button to set
Mute function On or Off.
The display disappears after 4 seconds.
SOUND MENU
SOUND Menu icon