Before operation, Remote control battery installation, Operating range – Canon LV-S1 User Manual
Page 15
15
BEFORE OPERATION
Pull out Battery Holder.
Replace with new battery. Install
with battery (+),(–) marks properly.
Install battery and
Battery Holder into
Remote Control Unit.
BATTERY
LITHIUM BATTERY
CR2025 (3.0V)
(+) mark indicates
its (+) polarity.
Put Battery + mark
as shown direction.
BATTERY HOLDER
REMOTE CONTROL BATTERY INSTALLATION
To insure safe operation, please observe the following precautions :
●
Use only specified battery. Improper battery may cause malfunction of Remote Control or improper battery's
installation may cause explosion.
●
Be sure to install battery with correct polarity.
●
Do not expose a battery to moisture or heat. Do not charge a battery.
●
If a battery have leaked on Remote Control Unit, carefully wipe the case clean and load a new battery.
●
Dispose used battery according to the battery-manufacturer's instructions.
●
Keep a battery away from children to avoid swallowing it accidentally.
1
2
3
30
°
30
°
Point Remote Control Unit toward projector (Receiver
Window) whenever pressing any button. Maximum
operating range for Remote Control Unit is about 16.4’ (5m)
and 60° in front of the projector.
16.4’
(5 m)
OPERATING RANGE