Canon DR-4010C - Manual (Page 91)

Chapter 6 Appendix
6-2
• The functions described above can be used if they are supported by the application software.
• Some functions may not be available, depending on the performance of your PC and on your
software.
Due to our ongoing efforts to improve our products, the specifications described above are subject
to change without notice.
Replacement Parts
Exchange roller kit (product code: 1921B001)
Kit to replace the roller unit (pickup roller, feed roller) and retard roller.
• Refer to “Removing and Attaching the Rollers,” on p. 4-5 for information about replacing the rollers.
• Contact your local authorized Canon dealer or service representative for detailed information
about the replacement parts.
Options
Bar code module (product code: 0434B003)
Additional software to allow the ISIS/TWAIN driver to recognize bar codes.
Contact your local authorized Canon dealer or service representative for detailed information about
the Bar code module.
24-bit Color 200 × 200 dpi
300 × 300 dpi
600 × 600 dpi (Speed priority)
600 × 600 dpi (Image quality priority) 42 pages/min.
42 pages/min.
24 pages/min.
20 pages/min. 84 images/min.
84 images/min.
24 images/min.
(not supported)
Amount of paper that can be
stacked in automatic feeder 10 mm stack, maximum
(100 sheets of 20 lb bond (80 g/m
2
))
Interface Hi-Speed USB 2.0 / SCSI-III
Other Functions Double feed detection, Long Document mode
Dimensions (with trays
closed) 12.5" Ч 10.9" Ч 7.3" (W × D × H)
318 mm × 278 mm × 185.5 mm (W × D × H)
Dimensions (with trays open) 12.5" Ч 21.5" Ч 7.4" (W × D × H)
318 mm × 545 mm × 187 mm (W × D × H)
Weight Approximately 14.1 lb (6.4 kg)
Power Supply AC 120 V (60 Hz)
AC 220-240 V (50 / 60 Hz)
Power Consumption 120 V model 220-240 V model
Scanning:
Standby: 25 W maximum
Under 3 W 24 W maximum
Under 3 W
Noise Not more than 68 dB
Operating Environment Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity: 20% to 80% RH