Canon DR-4010C - Manual (Page 124)

Chapter 7 ISIS/TWAIN Driver Settings
7-29
Start Value
Enter the start value for the counter.
Increment
This is the counter increment value. The counter increments by the value entered here.
Increment Trigger
Specifies the type of event that triggers a counter increment.
[New File] (ISIS driver only)
The counter increments when a batch separation occurs according to the Batch Separation settings
on the [Others] tab sheet. (See “Batch Separation (ISIS driver only),” on p. 7-21.)
[Every Page]
Increments once per page.
[None]
No counter increment occurs.
Reset Value
Select the initial value when the counter is reset.
Reset Trigger
Specifies the type of event that resets the counter.
[New File] (ISIS driver only)
The counter is reset when a batch separation occurs according to the Batch Separation settings on
the [Others] tab sheet. (See “Batch Separation (ISIS driver only),” on p. 7-21.)
[Every Page]
Resets the counter once per page.
[None]
No counter reset occurs.