Dell Inspiron 5000e - Manual (Page 63)

V NOTICE: To prevent data loss, turn off your computer before removing or
installing a hard drive. Do not remove the hard drive while the computer is in
standby mode or hibernate mode, or if the power light is lit.
1
Save and close any open files, exit any open application programs, and
shut down the computer.
2
Remove all installed batteries and disconnect the AC adapter cable and
any external devices from the computer.
3
Turn the computer over, and remove the hard drive screw.
HINT: You need the
Microsoft Windows Installation
CD to install Windows
operating system. You also need
the
System Software
CD to
install the device drivers and
utilities on the new hard drive.
bottom of computer
NOTICE: When the hard drive is not in the computer, protect the drive from
exposure to static electricity by storing it in protective antistatic packaging.
4
Slide the hard drive out of the computer.
5
Remove the new drive from its packaging.
Save the original packaging to use when storing or shipping the hard
drive.
6
Slide the new drive into the computer.
V NOTICE: Do not force the drive into the computer. If you experience some
resistance, use firm and even pressure to slide the drive into place.
Adding Parts | 65