Safety and warnings – Zippy GSM-7450P User Manual
Page 16
–
–
HG2, HP2, GSM and PSL
Ver. 2.0
- 16 -
Safety and Warnings
IMPORTANT INFORMATION ON
SAFETY AND PROPER OPERATION OF THE POWER SUPPLY.
<< Read the information carefully before using it. >>
1. Only authorized technician or service center is allowed to open the power supply for
product services.
2. Never alter the power supply cord or plug. Improper modification can result in severe
electrical shock.
3. Connect power supply only to designated power sources. Do not place any other materials
into the inlet of the power supply other than the power cord.
4. Do not plug or unplug the power cord with wet hands.
5. To avoid power cord damage, remove the power cord from the wall outlet by grabbing the
plug instead of the cord.
6. Make sure the power cord is properly routed so that it will not be stepped on, tripped over,
or otherwise subjected to damage or stress.
7. To avoid electrical shock, unplug the unit from the power source before attempting any
cleaning.
Note1: For safety purposes, power cord must comply with the requirements of the National
Safety Code.
Note2: All relevant registered trademarks are strictly the property of their respective companies.
Note3: No further notice will be given for any revision of the product, either modification or a
newer version.