CLIFFORD 590.4X - Manual (Page 30)

27 © 2011 Directed Electronics. All rights reserved.
Configurations
Setting Timer Start
1. Disarm the system then access the Adjustments feature menu.
2. Toggle to
Timer Start and press the menu wheel, the Timer
Start screen with current setting is displayed. If the system is not
ready the
NO FUNCTION ASSIGNED
screen and tone plays. Return
to Step 1.
3. Press the menu wheel to enter the How Many? (Starts) field or
toggle and press to enter the How Often? (Hours) field.
4. To adjust and save new settings follow the on-screen instruction.
s Menu Wheel: toggle to adjust the setting up/down.
s or : Press to adjust the setting up/down.
s
AUX
: Press to reset the setting to default.
s : Press to delete new settings and go back to the Adjust-
ment feature menu.
* See “Advanced Start” on page 40 for more details.
Smart Start*
Options: Low Temp Start , High Temp Start
The Smart Start adjustment screens are used to set the low temperature
and high temperature thresholds the Smart Start feature uses to start the
engine, when enabled.
Note Before beginning adjustment the system must be in commu-
nication range of the remote and in the disarmed state.
Setting the Low and High Temperature thresholds:
1. Disarm the system then access the Adjustments feature menu.
2. Toggle to
Smart Start and press the menu wheel, the Smart
Start screen with current setting is displayed. If the system is not