Xpres Gem Tec - Manual (Page 6)

Working with R-Wear
Rhinestone Costs
Now click File>Output>Print or select
the Print icon from the top property
bar - you will then see the window
above. Tick the Print Stones &
Cutting Lines option, you will now see
the design appear as shown above
(in
). Now click Print. blue
Once the cutter has been set up with the
relevant material click Yes to start cutting
the design.
See overleaf on how to setup
the materials ready for cutting.
4
After designing your transfer you can
view cost details. Once the design
has been converted to
Rhinestone/Dot format click on the
‘Information of used stone’ icon as
shown above. You will now see the above window,
as shown in
you can see how
many Rhinestones have been used
in your design and also the total cost
of Rhinestones used under
‘Summary’.
red
? The costings can be shown in different currency’s by changing the currency option as
shown on page 2
?
New rhinestone sizes and costs can be set as shown on page 2.