Workrite Glide 2 - Manual (Page 2)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Installation Instructions for Workrite Glide #1500143 - Rev A
2
Attach Platform to Track
Arm using four Screws and
Kep-nuts provided.
B
A
1
Slide Mouse Trap onto back
edge of Mouse Platform.
C
E
F
3
Place Non-skid Mat on top
of Keyboard Platform.
4
Snap Document Holder onto
back of Keyboard Platform.
D
5
Adhere Cord Clips to sides
of Track Arm.
G
5
1
2
3
4
I
7
If provided, clip Mouse Wrist
Rest onto Mouse Platform.
7
6
Attach User Guide to under
side of worksurface. (Guide
protrudes from front edge of
worksurface.)
6
H
Note: If installing on Locking
Lever Arm, use longer bolts
provided with the Locking Lever
Arm - not the screws in this kit. Locking Lever Arm
NOTE - Track Arm must be
installed under worksurface
before attaching Platform
!