Workrite Sierra HXL Assembly Instructions for 2-Leg Front Crank Workcenters - Manual (Page 3)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 3 of 8
Workrite Sierra HXL™ 2-Leg Crank Workcenters - Assembly Instructions
...continued
Placement of the legs is very important. Take the time now to lay out the Legs (A & N), Leg
Brackets (B, C, and P), Crank Tube (Q), and Top Leg Brackets (D & O) on the floor in the proper
location.
Note that the right leg will be on your left and vice versa when the assembly is seen from
the back.
Attach Top Leg Bracket to Legs
If you have purchased the HX Spacer Accessory
Kit, refer to instructions provided with that product.
Otherwise, proceed to step a .
Note: Right and Left Legs are interchangeable.
These instructions assume you’ll use the leg from the
main carton as the Right Leg, and the leg from the
Second Leg carton as the Left Leg.
Attach one Top Leg Bracket (D or O) to the top of
each Leg (A or N) using M6 × 12 mm Button Head
Screws (I).
To avoid stripping the threads,
always insert and make the
first few turns of the screw BY
HAND with an Allen wrench
(H), ensuring it is in straight.
a
O
I
H
N
I
D
A
b
Right Leg Left Leg
D
A
O
C C
N
R
R
B
P
Q
1
2
b