Service manual only – Wine Guardian Through-the-Wall Wine Cellar Cooling Systems 50Hz (WG25) - Manual User Manual
Page 54

53
测试模式设定
Test mode setting
18号设定项
Setting 18
使用模式按钮进入18号设定项。
Press “Settings” button to advance to Setting 18.
使用向上或向下键进行设定。设定值为1时,控
制器将自动开启所有输出端(电热系统除
外)。出厂默认值为0。
Press the “Up” or “Down” buttons to adjust to
the desired setpoint. When set to one the
controller will automatically turn on all outputs
with the exception of electric heat. Factory
default is zero.
0 = 关
Zero (0) = Off
1=开
One (1) = On
系统选择
System Selection
19号设定项
Setting 19
请勿更动
DO NOT CHANGE
SERVICE MANUAL ONLY
This manual is related to the following products: