Wine Guardian Through-the-Wall Wine Cellar Cooling Systems 50Hz (WG25) - Manual - Manual (Page 49)

48
温度单位
Deg F or Deg C
1号设定项
Setting 1
按向下键可将温度单位从华氏度（Deg F）变为
摄氏度（Deg C）。
 Press the “Down” arrow to change temperature
from Deg F to Deg C.

按向上键则可将温度单位从摄氏度变为华氏
度。 
 Press the “Up” arrow to change temperature
from Deg C to Deg F.
低温警报触发点
Low temperature
alarm set point
2号设定项
Setting 2
使用模式按钮进入2号设定项。
 Press “Settings” button to advance to Setting 2.
 使用向上或向下键调整温度警报触发点。出
厂默认设定为10摄氏度。
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 10 Deg. C.
高温警报触发点
High temperature
alarm set point
3号设定项
Setting 3

使用模式按钮进入3号设定项。
 Press “Settings” button to advance to Setting 3.

使用向上或向下键调整温度警报触发点。出厂
默认设定为18摄氏度。
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 18 Deg C.
低湿警报触发点
Low humidity
alarm set point
4号设定项
Setting 4
 使用模式按钮进入4号设定项。
 Press “Settings” button to advance to Setting 4.
使用向上或向下键调整湿度警报触发点。出厂
默认设定为5%。
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 5%.
高湿警报触发点
High humidity
alarm set point
5号设定项
Setting 5

使用模式按钮进入5号设定项。
 Press “Settings” button to advance to Setting 5.

使用向上或向下键调整湿度警报触发点。出厂
默认设定为95%。
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 95%.