Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 51)

53
STANDARD CONTROLLER FUNCTIONS
Humidity Up Button
Temperature Down Button
“Heat” symbol
Settings Area On/Off (left side)
How to:
Turn system on/off
 Press the On/Off” button once.
Note: There is a five (5) second
time delay before the system
turns on or turns off.
Change Temperature
 Press the “Up” arrow once. The
display will show the existing
temperature set point.

Press the up or down arrow
buttons to adjust the temperature
to the desired set point.
Change Humidity %RH
 Press the “Up Arrow” once. This
display will show the existing
temperature set point.
 Press the “Settings” button once
to display the Humidity setpoint.
 Press the “Up” or “Down”
arrows to adjust the humidity to
the desired set point. Note – a
Wine Guardian humidifier must
be installed and setting six (6)
set to “1” or “2” before the
controller will let you change
percent humidity.
Settings button (right side)
“Cool” symbol