Wine Guardian Ducted Split Wine Cellar Cooling Systems (WGS175) - Manual - Manual (Page 49)

51
If using multiple Remote Sensors in one wine room continue to mount the remaining sensors
before installation of the sensor cover plates. When multiple sensors are used the sensor
jumper position must be adjusted in order for proper averaging of temperature and humidity
readings. See page 27 for jumper set up.
Joining Communication Cable
Important
Wine Guardian cooling systems are supplied with 15 meters of 6 wire, Cat 3 twisted pair
communication cable with RJ11 type connectors. Caution must be taken when
connecting two lengths of communication cable (splicing) to ensure uniform wire color
before and after splice. An RJ11 Modular 6 wire STRAIGHT THROUGH type coupler
is the ONLY coupler approved for splicing Wine Guardian twisted pair communication
cable.