Canon A800 - Manual (Page 113)

Changing Shooting Function Settings
113
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 45) . This
also works when [Auto Power Down] is set to [Off].
z Choose [Power Saving], then press the m
button.
z Press the op buttons to choose [Display
Off], then use the qr buttons to choose a
time.
z In order to save battery power, you should
choose less than [1 min.].
After pressing the button, press the qr buttons to choose G, then change
the settings in the 4 tab (p. 41) .
Turning Off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions when
you press the shutter button halfway. You can turn off the lamp.
z Choose [AF-assist Beam], then press the
qr buttons to choose [Off].
Before attempting to shoot using a function explained in this section in
modes other than
G, check if the function is available in those modes
(pp. 130 – 135) .
Changing Shooting Function Settings