Vinten Radamec HS-105P Pan & Tilt Head - Manual (Page 7)

HS-105P pan and tilt head
6
Warning symbols
WARNING!
Where there is a risk of personal
injury or injury to others,
comments appear supported by
the warning triangle symbol.
Where there is a risk of damage to
the product, associated
equipment, process or
surroundings, comments appear
supported by the word ‘caution’.
ELECTRIC SHOCK
Where there is a risk of electric
shock, comments appear
supported by the hazardous
voltage warning triangle symbol.
FINGER TRAP
Where there is a risk of trapping
fingers within parts of the
product or other equipment
mounted to the product,
comments appear supported by
the finger trap symbol.
READ INSTRUCTIONS
On encountering the warning
triangle and open book symbols
it is important that you read the
operators guide supplied with the
product before attempting any
adjustment or repair.
Usage
The AutoCam™ HS-105 pan/tilt head is
designed specifically for use with ENG size
camera and lens configurations with a 34 kg
(75 lbs) capacity. The head can be fitted to a
number of standard tripod and pedestal
mountings, and it can also be wall mounted or
inverted for suspension from ceilings.
The product is intended for use by television
camera operators, trained to use Vinten
Radamec robotic equipment. Do not use this
product for any other purpose other than that
specified in this usage statement.
!
CAUTION
finger trap
!
Disposing of old electrical and
electronic equipment
When you see this symbol on
a Vinten Radamec product it
indicates that this product
must not be disposed of with
household waste. In some
countries or European
Community regions, separate
collection systems have been set up to
handle electrical and electronic waste
products. This product must be disposed of
at a collection point for the recycling of
electrical and electronic equipment. For more
information about disposing of this product,
visit www.vintenradamec.com/support/
WEEE. By ensuring this product is disposed
of correctly, you will help protect human
health and conserve natural resources and
the environment.
Warning!
1. Do NOT attempt to use
this product if you do not
understand how to operate
it.
2. Do NOT use this product
for any other purpose than
that specified in this Usage
statement.
3. Maintenance beyond
that detailed in this
Operators Guide must be
performed only by
competent personnel.
4. When installed in
overhead applications.
regularly inspect the
mountings and fall
arresters.