Routine checks, Changing the fuse, Switch off power to the fusion ccu – Vinten Radamec Fusion Camera Control Unit (CCU) User Manual
Page 17: Lift out the fuse compartment, Maintenance
6
Maintenance
Routine checks
During use, check the following:
• Check that both PSU 1 and PSU 2 LEDS are illuminated.
• Check all cables are secured and seated correctly.
No further routine maintenance is required.
Changing the fuse
To replace a fuse:
1.
Switch OFF power to the Fusion CCU.
2.
Carefully insert a small blunt screwdriver or similar tool into the side of the fuse compartment and lever
out.
3.
Lift out the fuse compartment.
4.
Replace the failed fuse and then replace the fuse compartment, pushing firmly into place.
5.
Switch ON power to the Fusion CCU. Ensure the Power ON/OFF switch illuminates and that the PSU1
and PSU2 LEDs illuminate.