Vinten Radamec Free-d - Manual (Page 10)

Vinten Broadcast Ltd free - d ™ Installation Manual V1.4.4
Page 10 of 46
4 Interconnection
Cables indicated by a dotted line are not supplied with the Free-d
system.
When connecting the
free-d™ processor to the calibration PC, an RS-422/232
converter will be required and a direct, pin-to-pin cable, 9-way male D-type to
9-way male D-type. The SDL cable to connect the
free-d™ processor to an
Onyx, Onyx2, Xync interface or Virtual Scenario SCU should be made as
follows:
free-d™ Onyx Onyx2 Xync
Interface
Virtual
Scenario
9-way male
D-type
9-way female
D-type
9-way female
D-type
25-way female
D-type
9-way male
D-type
2 Tx- 2 Rx- 2 Rx- 15 Rx- 5 Rx-
8 Rx- 3 Tx- 3 Tx- 14 Tx- 9 Tx-
3 Rx+ 7 Tx+ 4 Tx+ 2 Tx+ 8 Tx+
7 Tx+ 8 Rx+ 6 Rx+ 3 Rx+ 4 Rx+
RS-422
To VR System
NTSC Monitor Video
Target Seeking Camera TSC
Genlock
Input
(if required)
TSC Video
TSC PSU
110/230Vac
Lens encoder data
Free-d Processor Unit
24Vdc
110/230Vac