Vinten Radamec Ci Box ICE Interface - Manual (Page 5)

3
Safety and About this Manual
Operating Environment
Cleaning
Maintenance
About this Manual
The range of Vinten Radamec Ci box ICE interfaces have been
designed to assist in the integration of third party compatible broadcast
products/equipment to Vinten Radamec control systems. This manual
covers the installation and configuration of a Ci box, and its connections
with compatible products and studio equipment.
Compatibility
The following table describes the key differences between the Ci boxes
available:
CAUTION! The product should not be used outside the
operating temperature limits. Refer to the product technical
specifications for the operating limits for the product.
WARNING! Risk of electric shock. Always disconnect and
isolate the product from the power supply before cleaning.
CAUTION! Do not use solvent or oil-based cleaners,
abrasives or wire brushes. Only use detergent-based
cleaners.
WARNING! The fitting of non-approved parts and
accessories, or the carrying out of non-approved alterations
or servicing can be dangerous and could affect the safety of
the product. It may also invalidate the terms and conditions
of the product warranty.
Interfaces
Ci Box Ethernet RS232 RS422 Modem
Ci-1
V4115-0001
Ci-2
V4115-0002
Note
The Ci-1 box is used for illustrative purposes throughout
this manual.