Unpacking, Setting up your unit – Vintage Cellars Magnum 12-Bottle User Manual
Page 3
![background image](/manuals/641411/3/background.png)
3
Unpacking
While unpacking your unit, please check to make sure that all parts are included and undamaged. Please
call WineKeeper at 855.511.5113 if there are any problems. YOU MUST REPORT damage immediately
and missing parts within 7 days of receiving your unit.
These parts are included with your unit:
• Appropriate number of faucets for your unit
• Regulator (for use with refillable nitrogen or argon cylinder)
• Cleaning kit
• Instructions
Setting Up Your Unit
Your WineKeeper wine dispensing unit must be installed on a flat, level surface with vented space of at
least 3" behind, 1" on the sides, and 12" above the unit for proper ventilation. Once your unit is properly
located, attach the faucets. Taking care to align the threads properly, place the faucet on the thru-wall and
tighten the wing nut.
You may now plug the units’ power
cord into 110 volt grounded
electrical outlets.
An 8 foot gas supply line is included
with your unit. The supply line
includes a quick connect fitting that
connects to the regulator supplied
with your unit. USING A
REGULATOR OTHER THAN
THE ONE SUPPLIED WILL
VOID THE WARRANTY. Your
nitrogen/argon cylinder can be
placed anywhere convenient—
vertical or horizontal.
DO NOT TAMPER
WITH OR REMOVE THE
QUICK-DISCONNECT TO
COUPLE YOUR GAS SUPPLY
LINE AND REGULATOR,
THIS WILL ALSO VOID
THE WARRANTY.