Vintage Cellars ML24WD - Manual (Page 21)

21
DOOR ALIGNMENT AND OBTAINING SERVICE
Door alignment for solid and glass door
models:
The door should be parallel to the sides and top of the ap-
pliance. If alignment is necessary the door may be adjusted
by loosening the 2 screws which secure the door adjust-
ment bracket on the bottom of the door (see Figure 28a)
and adjusting the door side to side. Use a 5 ⁄
32
” allen wrench
for this procedure. (See Figure 28 below). When finished
aligning the door, tighten the screws securely.
If Service is Required:
• If the product is within the first year warranty period
please contact your dealer or call AGA MARVEL Cus-
tomer Service at 800.223.3900 for directions on how to
obtain warranty coverage in your area.
• If the product is outside the first year warranty period,
AGA MARVEL Customer Service can provide recom-
mendations of service centers in your area. A listing
of authorized service centers is also available at www.
agamarvel.com under the service and support section.
• In all correspondence regarding service, be sure to
give the service number, serial number, and proof of
purchase.
• Try to have information or description of nature of the
problem, how long the appliance has been running, the
room temperature, and any additional information that
may be helpful in quickly solving the problem.
• Table "D" is provided for recording pertinent information
regarding your product for future reference.
For Your Records
Date of Purchase
Dealer’s name
Dealer’s Address
Dealer’s City
Dealer’s State
Dealer’s Zip Code
Appliance Serial Number
Appliance Service Number
Date Warranty Card Sent (Must
be within 10 days of purchase).
Door should be
parallel to top
and sides of the
appliance.
Table D
Door
adjustment
bracket
Figure 28a
Loosen (don't remove)
these two screws.
Bottom
of door
Figure 28