Vintage Cellars CL:DV315MGN3U - Manual (Page 13)

13
TEMPERATURE ADJUSTMENT - MULTI-PURPOSE CELLAR
Ideal temperature levels are preprogrammed from the factory. The preset levels give a temperature range of 64°F to
46°F (18 °C to 8°C ) from the top to bottom of the cellar. The graduated stratospheric effect inside the cabinet means
that the area in the middle of the cabinet will then be 55°F (or 13°C) – perfect for aging.
You can adjust the overall temperature RANGE by a few degrees (up or down) as desired. Possible settings are:
TOP of temperature range (top of cabinet), followed by the BOTTOM of the temperature range (Bottom of Cabinet):
63°F to 45°F (17°C to 7°C);
64°F to 46°F (18°C to 8°C);
66°F to 48°F (19°C to 9°C).
Note : Some Fahrenheit models will switch to a Celsius setting for temperature setting adjustments. The
temperature for the top of the cabinet will be blink at the bottom of the display, and pressing the “up” or “down”
buttons will give preset options of 17
°,18°, or 20° (remember - to set the new temperature selection you must
simultaneously press the Up and Down arrows for 5 seconds (as mentioned above) . By setting the top-of-cabinet
temperature in this way, the rest of the cabinet will then automatically adjust accordingly (display will return to F°).
Simultaneously
press the Up and
Down arrows for 5
seconds; a beep
sounds.
Simultaneously press the Up and
Down arrows for 5 seconds. A beep
sounds. The changes are accepted,
and the cellar returns to display the
current temperature in the cabinet.
The temperatures will then
gradually increase or decrease
according to the desired setting.
The temperature value already selected flashes. Using the
Up and Down arrows, select the new temperature value
desired. A beep signals each change.
Simultaneously
press the Up and
Down arrows for 5
seconds; a beep
sounds. The temperature value already selected flashes. Using
the Up and Down arrows, select the new temperature
value desired. A beep signals each change.
Simultaneously press the Up and Down
arrows for 5 seconds. A beep sounds.
The changes are accepted, and the
cellar returns to display the current
temperature in the cabinet. The
temperatures will then gradually
increase or decrease according to the
desired setting.