Vintage Cellars LECBILD1400 - Manual (Page 3)

B I L D W I N E C A B I N E T S
-3-
I. I M P O R T A N T N O T E S
 WHEN TAKING DELIVERY OF YOUR WINE CABINET, FOLLOW THE INSPECTION
PROCEDURES DESCRIBED IN CHAPTER III.
 YOU MAY PLUG IN THE COOLING UNIT AT TIME OF DELIVERY TO TEST THAT IT
WORKS. ONCE TESTED, WE RECOMMEND SWITCHNG “OFF” THE COOLING
UNIT AND WAITING FOR 24 HOURS BEFORE NORMAL OPERATION.
 THE COOLING UNIT SHOULD BE PLUGGED INTO AN OUTLET CONNECTED TO A
15-AMP CIRCUIT
 IF THE WALL OUTLET IS DIRECTLY BEHIND THE WINE CABINET, USE AN EXTENSION
CORD (GROUNDED; 14 GAUGE OR THICKER) AND COIL THE EXCESS AT THE
TOP OF THE CABINET SO THAT YOU WON’T NEED TO MOVE THE WINE CABINET
IN THE EVENT THAT THE COOLING UNIT NEEDS TO BE REPLACED.
 WE RECOMMEND PLUGGING THE COOLING UNIT INTO A SURGE PROTECTOR
(MINIMUM OF 15-AMPS) TO PROTECT THE ELECTRICAL COMPONENTS FROM
POWER SURGES OR SPIKES.
 THE COOLING UNIT SHOULD BE “OFF” WHEN LOADING LARGE QUANTITIES OF
BOTTLES. IF THE COOLING UNIT RUNS WHILE THE DOORS ARE OPEN, IT WILL
CAUSE EXCESS CONDENSATION, LEAKING AND A REDUCTION IN COOLING
POWER
P L E A S E N O T E!
UNTIL YOU’VE LOADED BOTTLES INTO YOUR WINE CABINET, BE CAREFUL WHEN
OPENING THE DOOR. WHEN THE DOORS ARE OPENED, THE CABINET MAY TIP
FORWARD IF THE CABINET IS EMPTY.