Vintage Cellars LECBILD1400 - Manual (Page 16)

B I L D W I N E C A B I N E T S
-16-
VI. C O O L I N G U N I T O P E R A T I N G I N S T R U C T I O N S
COOLING UNIT SELECTION
We offer a choice of several cooling units with your BILD wine cabinet, which should
be selected based on the size of the cabinet, the temperature in the ambient
environment and the desired temperature inside the wine cabinet, as follows:
Ambient Temperature Recommended Cooling Unit
Less than 85°F CellarPro 1800QTL
Between 85°F & 95°F CellarPro 1800QT
AIR FILTER
All wine cabinets include an air filter that magnetically attaches to the rear of the
cooling unit. To replace the filter, remove the filter frame from the rear of the cooling
unit and replace the air filter when it becomes dirty. The frequency can be anywhere
from 3 to 9 months depending on the conditions in your location.
When replacing the filter, the blue fibers should face the cooling unit, and the white
fibers should face away from the cooling unit. Replacement filters may be
purchased at
www.lecache.com .
CELLARPRO COOLING UNIT
 Factory Settings
The settings on your CellarPro cooling unit have been preset and optimized by the
factory, and it is not necessary to change these settings initially.
If you find that you want to change one or more of the settings, we strongly
recommend that you allow the cooling unit to operate for 14 days before making
any changes.