Vintage Cellars Transtherm Bastide Glass Door Wine Cellar Black - Manual (Page 5)

GB
English - P 5
Power supply
For your personal safety, the wine cabinet should be properly earthed. Make sure
that the plug is earthed and that the installation's circuit is protected by a 30 mA*
fuse. *not applied to certain countries
Any intervention should be carried out by a qualified electrician.
Installing your wine cabinet
When unpacking your cabinet, make sure that there are no traces of
impact or deformation and that there are no surface defects.
Carefully remove all of the protections and adhesive strips from the
packaging around your wine cabinet.
Open the door and make sure all components are intact.
Release the electrical lead.
Move your cabinet to its final location.
The place you have selected for your cabinet should:
- Be unencumbered and well ventilated,
- Enable a minimum 10 cm space between the wall and the back of the cabinet,
- Be well away from any heat source,
- Not be too damp (laundry, pantry, bathroom, etc.),
- Have a solid and flat floor,
- Have a standard and accessible electricity supply (standard socket to
country standards, linked to ground with differential trip),
- It is NOT recommended to use a multi-socket or extension lead.
ecommandation
important
stuce
Trick
ecommendation
ecommandation
important
stuce
Trick
ecommendation