Vetter Pipe sealing bags and bypass bags FS - Manual (Page 13)

Page 13/18
6. VETTER Pipe Sealing Bags 1.5 bar FS
6.1 Description
Due to their design, Vetter pipe sealing bags 1.5 bar can be used
for sealing off pipelines and channelling e. g. for storage of extin-
guishing water.
9 When selecting the pipe sealing bag please observe the max.
counterpressure. (Refer to “Technical Data”)
9 Connect the inflation hose to the pipe sealing bag and then to
the controller 1.5 bar.
9 Position the pipe sealing bag, along its whole length, into the
pipeline and suitably secure it, e. g. with a structure support,
depending on the work to the carried out.
9 Inflation of the pipe sealing bag can be carried out according
to chapter 4.
6.2 Technical data pipe sealing bags 1.5 FS
Art. No. 1482000700 1482000800 1482000900
Art. No. with integra-
ted inflation hose
1482000100 1482000200 1482000300
Description RDK 7/15 FS RDK 10/20 FS RDK 20/40 FS
Pipe diameter
cm 7 - 15 10 - 20 20 - 40
inch 3 - 6 4 - 8 8 - 16
Diameter
cm 6.8 9 19.5
inch 2.7 3.5 7.68
Operating pressure
bar 1.5 1.5 1.5
psi 21.75 21.75 21.75
Test pressure
bar 1.95 1.95 1.95
psi 28.3 28.3 28.3
Test counter-pressure
m WS 5 5 5
psi 7.25 7.25 7.25
Cylinder length
cm 30 51 51
inch 12 20 20
Total length
cm 34.5 55.5 57
inch 13.6 21.9 22.44
Nominal capacity
l 3.8 11.5 44.8
cu.ft. 0.13 0.41 1.58
Air requirement
l 9.5 28.8 112
cu.ft. 0.34 1.02 3.95
Weight kg 0.5 0.9 3.1
Weight with integrated
inflation hose, 10 m
kg 3.3 3.7 6.5