Vetter Leak sealers - Manual (Page 5)

Page 5/39
1.2 Correct handling and usage
Depending on the application, Vetter leak sealers must only be
used with compressed air and only inflated to the corresponding
pressure with original inflation fittings.
They are exclusively used for sealing leaks on containers and
pipes.
Incorrect application of Vetter leak sealers includes the following:
9 Incorrect use, operation or maintenance of leak sealers.
9 Use of the leak sealers with defective safety devices or inflati-
on fittings which have been either incorrectly installed or are
non-functional.
9 Non-observance of the instructions contained in the opera-
ting instructions with respect to storage, operation and main-
tenance of the leak sealers.
9 Insufficient monitoring of accessory parts which are subject
to wear.
9 Incorrectly carried out maintenance work.
The following also belong to correct application:
9 Observance of all information contained in these operating
instructions.
9 Compliance to the periods for maintenance and care contai-
ned in the Chapter “Maintenance and Care”.
2. Safety instructions
The use of Vetter Leak Sealers is made under the precondition that
there is a knowledge of this application and that the operating
instructions are observed.
2.1 General information
The observance of all pertinent regulations with respect to work
protection, safety and accident prevention (e.g. GUV) as well as
generally recognized technological regulations is a precondition.
Leak sealers must be tested before application to see whether
they are resistant against hazardous materials. For this, refer to the
resistance chart!
The PVC acid protection cover for the leak sealing bag offers incre-
ased protection against acid spray.
Observe the pertinent regulations concerning handling with dan-
gerous liquids.
Protection equipment, such as protection clothing, gloves, hel-
met, face and eye protection, breathing protection and inherent
protection, are to be used onsite depending on the degree of
danger and the situation.