Vetter Leak sealers - Manual (Page 33)

Page 33/39
14. Vetter Sealing Paste
14.1 Leak Sealing Paste
Use the leak sealing paste to quickly and reliably seal difficult to
access leaks on even the smallest valve collars and flanges in pipe-
line systems and vessels such as drums and containers.
This paste is a general-purpose product for immediately sealing
leaks with fluid chemicals and is ideal for temporary immediate
measures. The seal can be used for several hours up to days.
It can also be used on slightly rusty, greasy or dirty substrates.
The leak sealing paste is water soluble, so it is not suitable for
sealing water leaks.
9 Uniformly press the leak sealing paste firmly into the leak with
a spatula, starting above the leak. Subsequently carefully glue
the leak with a generous amount of paste by carefully pres-
sing it and smoothing it on.
Protect the seal from weather effects.
14.2 X-TREME Leak Sealing Paste
With the X-TREME leak sealing paste you can quickly and easily
seal leaks in, e.g., vehicles or storage tanks that were caused by
accidents or due to material fatigue.
This paste is a special product for immediate sealing of leaks in
vessels such as those containing heating oil, diesel and other oil-
based products. It is perfect for temporary immediate measures.
The paste can be used for several hours up to days.
The X-TREME leak sealing paste stands apart especially with its
high stability and powerful adhesion force on nearly all oil-sme-
ared container surfaces.
9 Uniformly press the leak sealing paste firmly into the leak with
a spatula or a flexible support plate (such as a piece of film), st-
arting above the leak and then sustain the pressure for about
half a minute to stabilize it.
Protect the seal from weather effects.