Vetter Leak sealers - Manual (Page 32)

Vetter Leak Sealers
Page 32/39
13. Vetter Pipe Sealing Sleeves
Description
With the Vetter pipe sealing sleeves small cracks and holes in pipelines
(diameter ½“ to 1½“) can be quickly sealed mechanically with a maxi-
mum counter-pressure of 16 bar.
9 Place the inside sealing next to the leak.
9 Place the sealing sleeve over it.
9 Screw the hexagonal screws so that the pipe sealing sleeve can be
moved over the leak.
9 Seal the pipe sealing sleeve by tightening the hexagonal screws.
13.1 Technical data Pipe Sealing Sleeves
1/2“ 3/4“ 1“
Art. No. 1500002301 1500002401 1500002501
Nominal size
mm 21.3 26.9 33.7
inch 0.8 1.1 1.3
for diameter DN 15 20 25
Size (L x W x H)
mm 140 x 82 x 40 140 x 88 x 46 140 x 95 x 49
inch 5.5 x 3.2 x 1.6 5.5 x 3.5 x 1.8 5.5 x 3.7 x 1.9
Weight, approx.
kg 1.5 1.6 1.9
lbs 3.3 3.5 4.2
1 1/4“ 1 1/2“ 2“
Art. No. 1500002601 1500002701 1500002801
Nominal size
mm 42.4 48.3 60.3
inch 1.7 1.9 2.4
for diameter DN 32 40 50
Size (L x W x H)
mm 140 x 107 x 52 140 x 114 x 52 140 x 127 x 81
inch 5.5 x 4.2 x 2 5.5 x 4.5 x 2 5.5 x 5 x 3.2
Weight, approx.
kg 2.2 2.3 2.5
lbs 4.9 5.1 5.5
2 1/2“ 3“ 4“
Art. No. 1500002901 1500003201 1500003301
Nominal size
mm 76.1 88.9 114.3
inch 3 3.5 4.5
for diameter DN 65 80 100
Size (L x W x H)
mm 140 x 146 x 105 150 x 163 x 116 160 x 214 x 142
inch 5.5 x 5.7 x 4 6 x 6.4 x 4.6 6.3 x 8.4 x 5.6
Weight, approx.
kg 3.4 3.4 4.5
lbs 7.5 7.5 9.9
All rights reserved for technical changes within the scope of product improvement.