Vetter Mini Lifting bags 8 bar (116 psi) - Manual (Page 5)

Page 4/19
The single and dual controllers in the 8 bar fitting version do
not correspond to the requirements of the Fire Service stan-
dard DIN EN 13 731!
f. Dual controller 8 bar, fitting
Controller with inflation regulator using a ball valve without deadman
switching. Close the ball valve, thus ending the inflation process, when
the required operating pressure for the lift power or lift height is reached.
Latest when the safety valve blows off or the red marking is reached! To
empty the bag, open the head of the safety valve (1) by turning to the
left. Close the safety valve by turning to the right after deflation.
g. Single controller 8 bar, fitting
The same version as described in f) but used for the control of only one
Mini-Lifting Bag.
Inventory of items
An inventory and check of all items in the delivery package is to be made
according to the delivery documentation when acceptance of the Mini-
Lifting Bag equipment is carried out. A visual check and function check
is also to be made as specified in the operating manual.
2.2 Additional accessories
Pos. Article No. Description
1
1600 0261 00
or
1600 0262 00
Pressure regulator 200/300 bar
US Version 4500 psi
(not compatible with below
mentioned compressed air
bottles)
2 1600 0108 00 Comp. air bottle 6 l / 300 bar
3 1600 0199 00 Comp. air bottle 9 l / 300 bar
4 1600 0091 00 Dual connector 300 bar
5 1600 0145 00 Pressure regulator
1 1