Tycon Power TP-SCPOE-12XX Series - Manual (Page 5)

User’s Manual TP-SCPOE-12XX Series
Electrical specifications
1.0 INPUT
1.1 Input Source types:
A. Solar Panel
B. POE
1.2 Input Voltage:
A. Solar Panel: 18V~36Vmax
B. POE: 18V~57V
2.0 OUTPUT
Model TP-SCPOE-1212 TP-SCPOE-1218 TP-SCPOE-1224 TP-SCPOE-1248 TP-SCPOE-1248D
Output 1*
(at rear terminal)
12V/1.5A
(as Bat. Volt.)*
12V/1.5A
(as Bat. Volt.)*
12V/1.5A
(as Bat. Volt.)*
12V/1.5A
(as Bat. Volt.)*
12V/1.5A
(as Bat. Volt.)*
Output 2
(at upper RJ45)
12V/1.0A
(as Bat. Volt.)*
18V/1.67A
(regulated)
24V/1.25A
(regulated)
48V/0.625A
(regulated)
48V/0.35A
(regulated)
*maximum voltage clamped at 12.5V
3.0 Battery Charge Types:
A. Solar Panel: charge current depends on the wattage of the solar panel.
B. POE: fixed current, 2.6A max
4.0 Battery Types: 12V Lead Acid Battery
5.0 Protection:
5.1 Battery Polarity Reverse Protection:
If only battery connected to terminal, when the battery polarities were reversed,
the model will stop output and REV indicator light on.
When the battery be removed and re-connected to terminal, the function will be
disable, if there is PoE power sources connected, when the battery polarities
reversed, the fuse will be burnt.
5.2 Battery Over Discharge Protection:
Cuts off the load when the battery voltage is lower than 11V + 0.3V, and auto
recover when the battery voltage returns to 12 V + 0.3V